Attach a Wire Mesh Shelf to our Garage Shelving Unit
Add our wire mesh shelf to your three-level garage shelving unit, and you can increase the storage capacity even more, and move items such as balls, gloves, skates and helmets, off the floor and out of the way.
Installation and Usage
Shelf Mounting Bracket(s) must be installed on a load-bearing wall in your garage ( or an area of your choosing ).
Failure to install the bracket(s) on a wall capable of supporting the weight of the bracket ( 300 pounds ), may result in significant damage to wall structures. Please take care in this regard.
Multi-purpose hooks can be attached to the shelving bracket, or the shelving angles ( if your shelving unit becomes more than just one shelf ), to add additional storage capacity.
Ladder hooks can be installed at the bottom of your shelves, to safely and securely, store you ladder next to the wall, and out of the way.
With the brackets able to hold a maximum load of up to 300 pounds, you can easily adjust the shelving width anywhere from (4) four feet up to (8) eight feet.
Bill of Material
The Bill of Material is a list that contains everything you will receive, with the purchase of our Wall Mounted – Two Level Side by Side Garage Shelving Unit
|Amount||Description of Part(s)|
|1||(White Powder Coated) Left Wall Mounted Bracket|
|1||(White Powder Coated) Right Wall Mounted Bracket|
|1||(White Powder Coated) Left or Right Wall Mounted Bracket|
|5||(White Powder Coated) 24″ Shelving Angles|
|6||18″ Connecting Rods|
|9||5/16″ x 2 1/2 Lag Bolts|
|18||5/16″ Lock Washers|
|16||1/4″ x 1″ Carriage Bolts|
|4||5/16″ x 3/4 Hex HDR Screws|
|2||Pack of (4) Four Plastic Covered Hooks with Nuts|
|2||Ladder Hooks with Nuts and Washers|